How to Clean Fishing Reel | The Quickest & Easiest Way

From 2006, Fishing has become the most common outdoor sporting event in the US and an estimated $52.43 is spent per consumer unit on fishing and angling equipment. At least 60 percent of the participants are below 45. This simply shows that the annual expenditure and outings among fishing and angling participants have grown geometrically.

With the increase of fishing and angling activities gradually rising every day even among the young generation as the above statistics implies, it shows that fishing has become a very viable activity that is passed down to the younger generations

When there are more people fishing, it also equals to increase of purchased fishing equipment which includes a fishing reel. However, we are not just going to be talking about fishing and equipment’s alone, rather in this article you will be knowing how to clean a fishing reel.

So, if knowing how to clean a fishing reel is important to you, then keep reading and you will be well informed.
Basic Details You Should Know If you have taken the time out to invest in good reels for any type of fishing at all, it would be good to know more about them than just mere simple cleaning. Feel comfortable with taking your cleaning procedure a step further by removing the clutch ring, spool and so on.

To remove grit and debris from the parts, you can use a small paint brush or a toothbrush with a mild detergent. Once you are done with this process then you can proceed to rinse the parts and dry with a cloth that is soft and clean.

Ensure you air dry the reels and follow the manufacturer’s direction to lubricate. Once this is done you can reassemble the parts. Residue on the Reel The guidelines below should help keep your fishing tools in good working condition. Moreover, it is pertinent to note that if you are a saltwater enthusiast, you have to implement extra steps to focus on the one element that can result in severe problems with the moving parts.

When you use very good and quality reels for saltwater fishing, you should pay attention to removing the residue of salt. This is because it can have a similar effect as dirt or sand.
The residue that accumulates can cause the reel to gradually wear off. You can use a cloth that is soft and clean to remove excess water and use a good lubricant that would help prevent rusting.
Different Reels.

There are several ways to clean reels but it is solely dependent on the kind of reel that you use. Keep reading to know the best cleaning method that applies to your reel.

Follow the steps to clean fishing reel:

1. Cleaning A Bait-Casting Reel

If you are using a bait-casting reel, it might be a bit difficult to get used to. This is because when you cast, the spool turns and the line must be properly controlled to avoid a tangled mess.

You can clean your bait-casting reel with a cloth that is clean and damp. You can also engage in light maintenance often by using a light oil on both ends of the spool shaft, parts that contact the pinion gear and on the handle rivets.

If you are into saltwater fishing, you should soak it in clean water and remove the spool. Rinse the body with a light spray of water and ensure to remove the salt residue that you may not be able to see with a magnifying glass. Proceed to dry out excess water and allow it to air dry. To maintain your reel, use a light lubricating oil made for reel maintenance.
The oil should be applied on the:

• Handle knobs
• Spool release mechanism
• Stabiliser bar and ball bearings
• Spool shaft and spool shaft ends
Grease should be applied to the:
• Pinion Yoke
• Release slider, bushings
• Worm-shaft guard
• Main gear, pinion gear

2.Cleaning A Spin-Cast Reel

The spin-cast reel is quite easy to use but you may have to give up some accuracy and distance when casting. When you want to clean the reel ensure you do the following:

• Use a small paintbrush or toothbrush with a mild detergent to scrub the parts
• Lubricate with oil made for fishing equipment
• Remove the reel covers
• Disassemble crank bearing, spool etc.
If you are into saltwater fishing, it is best to remove the salt residue as much as possible.

3.Cleaning a Spinning Reel

In recent years, the spinning reel has grown to be popular amongst fish anglers. Most people find it easier to use than other fishing reels. Its accuracy is as a result of its design. Follow the same basic procedures as the others discussed above.

For the Spinning reel, here are simple cleaning practices to follow. Moreover, you should be accustomed to disassembling and assembling the fishing reels. Here are the following things you should do; You should lubricate the following parts with oil:

  • Clutch screw and spool-release mechanism
  •  Ball bearings
  • Arm lever and kick lever
  • Handle knobs
  • Pickup pin

Also, apply grease on the following:

  • Crankshaft
  • Crank gear
  • Center-shaft
  • Pickup arm
  • Roller wheel
  • Spool washers, bushings

Additionally, it is necessary you take some precautions apart from just cleaning and maintaining your fishing reels. For a saltwater fish angler, you should endeavor to use a lubricant spray to rinse the reels to remove the salt and grit.

Also, read best fly reel under $200


It’s simple enough when you take care of your fishing equipment, it will care for you. It doesn’t take you anything to keep your fishing equipment in order. Also, it’s important to have the right tools available to you when cleaning your fishing reel. Know you have a good knowledge of how to clean fishing reel, you can get on it and be sure you are doing the right thing.

Leave a Comment