How to Set Up a Fishing Pole | Beginners Guide For Fishing

Knowing how to set up your fishing pole is so significant for a successful and an enjoyable fishing experience and should not be taken for granted. Whether you just want to go fishing for fun or to catch a food, everyone both youth and first-time adults need to set their poles properly.

Do you wish to know how to properly set up your fishing pole and start fishing like an expert for the first time?

​According to United Nations statistics, there are about 38 million commercial fishermen and of this, 46% use a fishing rod. Unfortunately, nearly half of that does not have the required knowledge on how to set up a rod.

After spending your money to purchase one of your favorite fishing poles, the next thing is knowing how to apply them. In that regard, this article will take you through a step by step process to let you how to do so without any hassle and bustle. The process will be broken down into four major parts for better understanding. Further, the steps are subdivided into more precise steps for clarity.

how to set up a fishing pole with a bobber

Joining your rod and reel

​1. Distinguish the components of your fishing pole.

It is worth noting that a fishing pole can turn out to be an intricate piece of equipment thus it is a good idea to understand the specification before joining your own. In case your rod snaps into two parts or more, the point or join where the segments match together is known as the ferrule. The male ferrule encloses into the counterpart female ferrule.

✓ The arm is similarly known as the grip and this is where you handle the rod.

✓ The thick section of the rod that is adjacent to the handle is called the butt.

✓ The most flexible area of the rod is called the tip and is found right at the top of the rod.

✓ Other important components are the guides which are the rings that follow the rod that

guides the fishing line.

​2. First, clean the rod

The best way to clean your rod is wiping both parts down using a cloth in order to eliminate any debris or dirt that could damage it. If possible, use a cotton swab when cleaning the female ferrule. Note that by maintaining the cleanness of the rod, you will prolong its life. Remember that dirt can scrape and ruin the pieces that keep the rod together.

​3. Get the parts together

Arrange the male and the female parts in a smooth place. While keeping the female ferrule firm, attach the male ferrule around it. Always make sure that if need be, any guides to aid in securing the ferrules are correctly aligned.

✓ In case the rod is not getting together, simply stop immediately. Check the directions. Is there a locking way of any kind you may be missing? In case you force the rod together, you are likely to damage it for good; therefore, you need to take care!

✓ On quite a number of rods, you will require to twist the parts together. You can do this by grasping the female ferrule and twisting the male piece as they are appended.

4. Attach the reel

As you look at the base of your rod, you ought to notice a female hole to embed your reel. This is known as the reel seat. Embed your reel. Now set the reel seat, which appears like a soft handle, over the butt head of the reel. This will attach onto the reel. Revolve until the parts all feel tight.

Take care not to overdo the tightening of the reel. Forcing the threading to go beyond what it is made for may fracture and destroy the rod.

You need to get it right with threading that right is normally tight while on the other hand left is loose. When viewing your rod from the rear terminal, threading right will bind it. In simple terms, twisting clockwise will make the thread tighter, while twisting anticlockwise will loosen it.

The threading of your fishing pole

1. Raise the bale arm and stretch the thread

You should notice that the bale arm is the silver overhead section on the reel. At the time when you are using a small amount of force, you will be in a position to flit it up to the other part of the reel. When you are done elevating the bale arm, you will be ready to pull the end of the thread and the reel will unwind it.

✓ Caution is required here! In case the bale seems a bit rigid and does not lift smoothly, you may be viewing the wrong piece. Usually, you are not supposed to have to strong-arm the bale up.

✓ Ensure that the spool of the line unwraps the same way as the reel rotates. If they do not suit, you will have to unwanted knots and twists. If they are not the same course, just flip the spool to make sure the directions match.

​2. Thread the fishing lines into the guides

Many rods will have a varying number of eyelets or guides, connected to the rod. However, the common ones will be at least four or five. Beginning from the eyelet adjacent to the reel, keep threading it with your line starting at the back and getting out of the top. Proceed your way up to the tip of the rod.

​3. Close the bale arm

In order to close the arm, just flip it the reverse course as you earlier moved it. To confirm that it is actually closed, lightly pull the line. If everything is ok, no more line should be seen coming out.

​After that, you must examine the direction of the spool further by reeling in a little amount of line. In case the reel fails to revolve the same direction as the spool, you will have to start over after adjusting the direction of the spool.

Choosing the best Lure

​1. Select the appropriate color depending on the weather

​You should choose your lure that suits the prevailing conditions. Depending on the cloud cover and sun, you may need to use a distinct lure. On a sunny day, it is good to apply a silver lure. This is because the silver will aid in reflecting light and drawing the required attention. On the other hand, apply a gold lure on a cloudy day. The reason for this is that gold lure has the ability to greatly reflect hence will assist in giving off light on a stormy or overcast day.

​2. Select a lure type

Choose your lure type basing it on the kind of fish you are planning to catch and the place too. If you are fishing in a freshwater body, you should try a jig. A jig normally works best in freshwater by making use of the metal head and feathers to lure fish. In the case of fish that feed on other fish, spoon lure will be excellent. This is simply because the spoon will sway back and forth to resemble the motion of a fleeing fish, luring the larger predators.

In case you want a multi-purpose lure, use a spinner. This is a metal item that will whirl inside the water as it moves. As it does that, it will be noticeable and should be employed in especially hard-to-catch places.

​3. Check on the water purity

If your water is dirty or muddy, you will require a lure that can make a lot of movements. This can be a spoon or a spinner. These types of lures generate vibrations, thus even if the fish cannot notice the lure, they can at least sense it. Similarly, if the water is pure, an awful amount of movement and vibration may frighten off a fish.

Attaching the lure

​1. Threading the line

After you are done with threading the lure onto the line, allow about ten or twenty centimeters of the line on the other part of the lure.

Because of the fact that fishing line is very hard to see, it is usually a good practice to learn how to do knot tying with shoelaces or string.

2. Loop the line back around itself

As your lure and line are laying on the service, draw the free end of your line back up to the direction of the other part of the line. Lightly coil the head of the line around the line on the opposite side of the lure, like how a candy cane may have 2 colors coiled around another. Once you have wound your lines with each other about five times, you may stop.

3. Tucking the end of the line back through

While holding the tip of your line, drag it back to the direction of the lure. Secondly, circle it through the initial large loop that has the line. After that, truck it again within itself so that it appears to be originating from under the line.

4. Tighten the knot

Keep the line and its end as well then draw them carefully together. This should ensure that the line coils firmly the place it has been bound, and make a tight knot at the lure. Once the knot is tightly wrapped, clip the extra off the end. You can moisten the line to twist the knot properly.

 Setting up your fishing pole is not a hard thing to do. In fact, you only need to do it once or twice utmost. The good thing about this is that you only need to master the basics and you can apply it to all types of fishing poles.

​Final thought how to set up a fishing pole

​This article i discuss all the important things how to set up a fishing pole.After you read this you will better understand.Happy fishing.

Last Updated On

Leave a Comment