How to Set up a Fishing Rod for Beginners

Nothing is more relaxing than fishing, but it can be depressing if you fail to catch even a single fish. To prevent this from happening, you need to know the best techniques to catch a fish.

Today we are going to discuss from top to bottom, the entire procedure on how to set up a fishing rod for beginners. Do not worry if you are a beginner in this area. After going through today’s topic carefully you can master it for sure.

Before learning how to set up a fishing rod, you need to make sure you have all the essential pieces. It is not hard to find everything you need in one place. Here are the things you will need: 

  1. Fishing Rod
  2. Fishing Line
  3. Hooks 
  4. Bait
  5. Weights
  6. Bobbers

Keep in mind that the most important part of fishing gear is the fishing rod. So the first thing you have to do is to better understand all the tips and tricks related to a fishing rod. Let us discuss this topic in detail.

Different Parts of Fishing rod:

These are some of the different parts of the fishing rod that you must know before
getting ready to go for fishing:

1. Blank Part:

Blank is the most important part of the fishing rod as it acts as a backbone for other to be discussed parts. All the other parts are attached to this only. It is very thin at the beginning that is on the top area and thick at the bottom end.

Also, It comes in different shapes and sizes that depends mainly on the type of application for which it is about to be used.

2. Handle:

The handle you choose can be either lightweight or heavy. Basically one uses cork because of its lightweight feature. Heavier made handle is used for the application where it is required to catch some heavy fish.

3. Line guides:

These are made up of metals with a coating of copper to reduce or prevent the wear and tear as well as friction caused in the operation. They are present all over the blank for the purpose of casting.

They are smaller at the tip and bigger in size at the back side of the fishing rod.


4. Tip-Top:

The pointed part at the tip of the rod is commonly known as Tip-Top. Its operation is very sensitive so to
ease the work it is made thin and flexible.

5. Reel Seat:

It is the main control part of the fishing rod. It is the thing that connects the rod to the main controlling
reel. It should be placed tightly with the screws.

6. Hook Keeper:

It is not a mandatory part of the rod. Either you want to use it or not, it is completely up to you. It is just there to hold the hook in place when not used so that it does not swing in the air.

Is there any different kind of rod materials available?

Yes! There are mainly two types of rod materials available. Let us discuss both of them one by one

1. Rods made up of graphite or carbon fiber:

These rods are somewhat lighter in weight but are used to catch both types of fishes,
small as well as a big one. They are known for their excellent performance in deep

They are popularly known for their durability, strength and flexibilities. These three
features make it user’s first choice.

2. Rods made up of Fiberglass:

Rods made up of fiberglass is known widely for its toughness. It is heavy in weight in
comparison to graphite fishing rods but yes they are much more effective in
performing heavy purposes.

Processes Involved in “How to Set up a Fishing Rod for Beginners”:

These are some of the steps that are involved in setting up a fishing rod especially for beginners. Before getting into it, let us discuss the first important point:

What all I need?

These are some of the materials that you need in the process:

  • A-Rod
  • Reel
  • Sharpen Scissors
  • Bait or Lure
  • A fishing line that we had discussed.

Now, let us look at the procedure:

Step 1:

The very first step involves the assembling of the components. It depends whether you have one piece rod or two piece rod. If you have two piece rods, then adjoin the first part to another.

Then after the assembling, connect reel to the rod. Slide it up and lock it tightly using the screw at a place.

Step 2:

Next, you have to pass the fishing line through the holes that we had discussed earlier. These holes are the guide holes. Start from the sharp end and finish at the back.

Take care of the fact that no hole should be missed. When you reach the end, tie a knot around it.

Step 3:

Now it’s time to attach the lure. Knot the lure on the line and cut over the left line. That is all. It’s all done and you are just ready to go fishing.

Types of Fishing rods:

There are mainly two types of fishing rods are there. Let us discuss them in detail:

1. Spinning Type:

These are best suited for beginners as they are super easy to use. Amateur anglers are mainly used to learn fishing by the one who is new in this.


You can use it for small as well as big fishes. Any kind of fishes can be targeted by using this spinning kind of fishing rod. They have just one problem with it. They keep on twisting the fish line that may create a problem for you.

2. Baitcasting Type:

This type of fishing rod removes out the disadvantage associated with the spinning type. It does not get twisted. Also, a number of people say it is quite comfortable and easy to handle in comparison of spinning type.


Not on this, but also you can see better and accurate results with this type. Just remember one thing while operating it is that for easy going, you just have to hold and operate like a tennis racket.

One problem that people faces using this is bird nest. It is a problem that makes it quite difficult to use by beginners especially.

Some of the tips for choosing a fishing rod:

Take a paper and pen and note down all the tips that we are going to mention below:

  • Length is an important factor. Keep it up to seven and a half feet.
  • Matching is an essential factor.
  • Choose spinning rod if you are a beginner.


So, guys, these were some of the important points that you need to keep in mind if you want to be a master at
it. Go through it carefully.

Related Resources:

Best Bass Fishing Rod And Reel Combo

Leave a Comment